No break shifting
Moderator: hemingray
- ACLakey
- Knows UPS driver on a 1st name basis
- Posts: 457
- Joined: Fri Apr 22, 2005 12:38 pm
- Location: Klamath Falls, Or
- Contact:
No break shifting
I did this mod to my Grizz last week and love the outcome. I no longer have to either pull the rear break lever or step on the rear foot break in order to shift from reverse to high/low range.
I did not bend the arm nearly as much as shown in the picture to clear the plunger that is activated by the break. The lever locks the trany in place which forces you to hold the break to shift.
Here is another way to accomplish the same, but requires more work.
http://www.nyrocatv.com/techtip.cgi?vie ... iewtip=344
I can tell you the shifter works much smoother now than it ever did. Great mod and only took a few min.
I did not bend the arm nearly as much as shown in the picture to clear the plunger that is activated by the break. The lever locks the trany in place which forces you to hold the break to shift.
Here is another way to accomplish the same, but requires more work.
http://www.nyrocatv.com/techtip.cgi?vie ... iewtip=344
I can tell you the shifter works much smoother now than it ever did. Great mod and only took a few min.
Polaris eliminated this in 2006....you still have to stop though.
The last words spoken before a YouTube video is filmed: "Hold my beer, now watch this..."
Regards,
Ken Hower
RTF Director
http://www.rubicontrail.org/
Regards,
Ken Hower
RTF Director
http://www.rubicontrail.org/
Who is online
Users browsing this forum: No registered users and 22 guests